# Answers - Electricians Marketing

> Plain answers to the questions trade owners ask. A SAZ.ca company, a subdivision of SAZ.ca. Consulting by Sedighi.ca (Ali Sedighi). Updated 2026-11-19.

## What does a website cost an electrical contractor, by tier?
The rate card reads $1,600 for a landing page, $7,200 for a full website and $12,000 with booking. Each tier is a page count and a set of functions fixed in writing, so the invoice is a copy of the agreed scope rather than a surprise.

The tier is a scope decision, not a taste decision. A landing page carries one service line and one market for $1,600. The $7,200 build carries the job-type pages, the city pages, the licence and permit wording, the tracking and the monthly page report. The $12,000 build adds scheduling and payment for work that can be booked without a conversation. Copy, structure and mobile speed sit inside every tier. The page count is the first thing the scope locks down.
Anything outside the page list is quoted as it is identified: photography, video, stock licences, booking software and third-party subscriptions. Those numbers are itemised before the build starts rather than arriving on the final invoice. The website is also where the tracking gets installed, which is why the phone baseline is taken in the same month the pages go live rather than a quarter later.

Full answer: https://electriciansmarketing.ca/answers/website-cost-canada/

## What is the monthly cost of local search for electrical work?
Local search is $2,200, $3,600 or $5,200 a month on the published card. The tier follows coverage: one market and a service focus at the entry point, service and city pages in the middle, multi-city authority work at the top. It is month to month.

The entry tier lays the technical foundation, the profile and the opening page group, which is enough for a one-location shop with a short list of job types. The middle tier builds the combinations that carry the booked value and adds review flow, which is where most electrical companies land once the call volume steadies. The top tier suits several locations in competitive markets, where more pages and more earned links are needed to compete.
Advertising spend is never part of that figure, and the fee is not a percentage of media, so two proposals can be compared without decoding what the percentage hides. The work ends with written notice at a month boundary. The honest consequence of ending it is that positions already earned begin to sag, and the call record usually shows it a season later.

Full answer: https://electriciansmarketing.ca/answers/seo-cost/

## How long does search take to move the call record?
Profile fields and page titles can shift within a month. A page built for a competitive term usually needs two to four months before it holds. Paid search is the only line that produces calls in its first week, and it pays for every click.

The baseline month is the fastest because so much is usually missing: category, hours, service list, internal links, a tracked line that forwards properly. Cleaning those can happen in the same month and is often the cheapest gain on the board. New pages move at a different speed, because a page has to earn its position against pages that already hold links and history, and no calendar can promise the week it happens.
Reviews move the map block faster than a new page moves the ordinary results, provided the request goes out when the job closes and every reply is written in public. A report of positions alone explains nothing about revenue. The rows that matter are calls by source, quotes by job type and booked value by month, read against the baseline taken before any work started. If a page has not moved in two months, it changes or it goes.

Full answer: https://electriciansmarketing.ca/answers/how-long-seo-takes/

## What is a Google Business Profile, and how is it measured?
It is the free listing that carries the map pin, hours, phone, services, photos and reviews, and it sits above the ordinary results. Measured properly, it is calls from the profile, direction requests and the search terms that triggered the view, not a rating alone.

For most electrical searches the listing is met before the website, so the call button on it is the shortest path between a fault and a conversation. An incomplete profile loses calls without a trace: a category chosen to flatter, no service list, hours that ignore after-hours work, photographs of a van rather than finished panels. Take ownership first, confirm it, then match it to the site on name, number, services and cities.
The listing carries its own reporting, and it should be read monthly beside the site numbers: calls, direction requests, messages and the terms that produced them. Reviews are part of the asset, not a separate campaign. Ask at the job close, reply to everything in public, and watch whether profile calls rise with review volume. A profile untouched for a quarter loses ground to one worked weekly, and the dashboard shows it.

Full answer: https://electriciansmarketing.ca/answers/google-business-profile/

## How does an electrical contractor raise Google calls without ad spend?
Complete the profile, build one page per job type and one per market, and install a review ask at every job close. That is the free stack, in that order. Ads come after those three are measured, not before a baseline exists.

The profile decides whether the business appears in the map results, so it gets finished first: categories, services, hours, coverage, photographs and a steady review flow. The pages come next, one per job type and one per city, written for a person who is deciding whether to call. A single page listing every service competes with nothing in particular, whereas a single page about panel upgrades in one market has something specific to rank for.
Then the phone. A call answered quickly is a conversation and a call returned later is a coin toss, and the missed-call list is the most honest marketing report most companies never read. Page speed matters for the same reason: a slow page on a phone loses the visitor before the headline appears. Free traffic sent to a slow page or a voicemail is the most expensive traffic on the board.

Full answer: https://electriciansmarketing.ca/answers/more-calls-without-ads/

## Should the budget go to Google Ads or to search pages first?
Ads when the schedule is thin and a booked job covers the click. Pages when the goal is a channel that keeps producing after the account is paused. Point both at the same converting pages and judge them on booked value rather than clicks.

Paid search buys calls immediately, which suits emergency work and high-value planned jobs such as a panel upgrade, a charger install or a commercial fit-out. It also ends when the budget ends, and the click remains the most expensive component. Organic pages compound more slowly, cost less per call over a year, and keep earning through a quiet month when the media budget is held back. The two lines should be read on the same report, never in isolation.
The measurement decides the split. Take the baseline first: calls, job types, close rate and booked value by source. Then set the campaign so one booked job covers the spend it took to win it, and cap the budget at a number the business can read. A campaign pointed at a page that hides the price and buries the number wastes money at any bid. Build the page, then buy the clicks.

Full answer: https://electriciansmarketing.ca/answers/ads-or-seo/

## Does an electrical contractor still need a website beside the profile?
Needed, and more so on larger work. The listing produces the call and the site is what the customer studies before picking up the phone. It also holds the licence details, the price ranges and the photographs that the listing cannot carry in any readable form.

The profile shows a rating and a number and little else. It cannot present the full service list, the permit and inspection steps, the licence reference or a price range in a way a customer can read at their own pace. Paid traffic also has nowhere else to land, and search results for anything beyond the company name need a page behind them. The two assets should agree on name, phone, services and coverage.
The site can be small and still work. A page per job type, a published range, a tap-to-call number and photographs of real work beat a large site that says nothing specific. The page the profile links to carries the most weight and should load fast on a phone. Treat the website as the closing stage of a decision the listing began, and the size question answers itself.

Full answer: https://electriciansmarketing.ca/answers/website-vs-profile/

## What is a landing page, and where does it fit the plan?
A landing page covers a single job for a single buyer, with the price, the evidence and a call button above the fold. It fits whenever a click is being paid for, because a home page that lists everything makes the visitor hunt and most will not.

Paid traffic arrives with one question, and the page settles it immediately: what the job covers, what it costs to start, where it is offered, how to call. Each advertised job type deserves its own page, and each city gets its own if the campaign runs that way. The ad headline and the page headline should use the same words, or the visitor reads the difference as a switched offer.
It opens quickly on a phone, holds the number on screen and ends before the reader's thumb starts moving. This is not a sales letter. It is a brief page carrying a price range, three checkable facts and a way to call, and it is tested for sixty days against the page it replaced. One page per advertised job and one per market is the whole build, and it belongs in the plan before the first click is bought.

Full answer: https://electriciansmarketing.ca/answers/landing-pages/

## Freelancer, agency or in-house: which holds the measurement?
A freelancer can hold one channel. Four channels need one accountable owner, either a hire or an agency with a named person on the file. The test is not the title but who answers when a tracking number breaks on a Friday afternoon.

A freelancer is the cheapest route to one well-scoped fix and the most expensive route to four channels pulling in different directions, because their brief is narrow by design. A hire works when the marketing fills a week and the owner accepts managing a role, including tools, holiday cover and the risk of one person holding everything. Both can work, and both fail the same way: nobody owns the whole picture.
An agency bills a higher rate and can still win on cost per booked job when it is built with one named contact, published prices, a written scope and a monthly report tied to calls. Ask every candidate the same four questions: what is included, what it costs, who is accountable, and how it ends. The last answer is usually the most revealing, because it describes how the relationship will be run.

Full answer: https://electriciansmarketing.ca/answers/freelancer-agency-inhouse/

## How do I attribute calls and booked value to the right channel?
One tracked number per channel, forwarded to the office line, plus the source and job type recorded on every quote. Then report calls, quotes and booked value by source monthly. Without that, the busiest channel always looks like the best one.

The smallest version is three numbers: site, profile and everything else, all forwarded to the same phone so nobody has to think about which line rang. The habit that makes it work is writing the source and job type onto the quote at the first call. Call tracking software adds recordings and missed-call alerts where the volume justifies it, but the discipline matters more than the tool. A sheet filled in later is a guess dressed as data.
Missed calls are the leak most companies never measure, and they are often larger than any channel difference. If the phone misses one call in five past four in the afternoon, the marketing is working and the phone system is not, and that becomes the first fix. Read the same sheet on the same day each month against the same definitions, or the totals start describing the reporting rather than the business.

Full answer: https://electriciansmarketing.ca/answers/track-leads/

## What is AI search, and what does it change for a local electrician?
It is the machine-written answer that appears before the ordinary links and can name one business while skipping the rest. It changes which pages get seen, not how a good page is built: clear service, clear city, clear price, readable structure and checkable facts.

A machine reads pages, extracts claims it can verify, and writes a summary, and it prefers pages where the answer arrives early and the facts are stated plainly. A page that names the job, the market and the price range in the first paragraphs is easy to lift. A page that opens with company history and never quotes a figure gives the machine nothing to work with, whatever its design.
The work is the same discipline the rest of this practice runs on: measure, then write. Name the service and the place in the heading, put the price range on the page, keep paragraphs short and keep the phone number visible. Markup that declares the service, the price and the location helps a machine read the page correctly. The companies with clean, factual pages will be the ones quoted, and the rest will be summarised out.

Full answer: https://electriciansmarketing.ca/answers/ai-search/

## How do I grow reviews without breaking platform rules?
Request a review from every customer as the job closes, give them a one-tap link, and answer each review where everyone can see it. No incentive, no filtering, no writing on a customer's behalf. Recency and specificity beat volume, and a bought batch can cost the listing outright.

The request belongs with the invoice and the walkthrough, before the crew leaves the property, because the memory fades quickly. A text from the person who did the work, with a direct link, converts far better than a mailed campaign three weeks later. Ask the customer to name the job if they are willing, since a review that mentions a panel upgrade or a charger install helps the profile match those searches.
Replies are the second half. A short, specific answer that names the work reads as genuine and gives the listing another current signal, and every future customer reads it. Google does not permit gating, so the ask goes to everyone, and a mixed review is answered calmly rather than argued with. Track asks sent against reviews received each month, because the ratio tells you whether the habit is running or fading.

Full answer: https://electriciansmarketing.ca/answers/getting-reviews/
